Extraction
Coarse-fibre separation
Remove unwanted coarse material without claiming emulsion stability.
Technical duty overview. Exact model and rated performance are selected against your project specification.
Enquire about this module →
Inlet
What it receives
Extracted milk with a measured fibre and particle load.
Outlet
What it delivers
Milk meeting a specified coarse-particle limit, plus collected solids.
Structure and line connections
Choose screening or filtration duty from the required particle cutoff, viscosity, solids loading and acceptable product loss. Provide access for screen changes and pressure monitoring.
Cleaning and inspection interface
Define inspection of screens, seals and support surfaces. Confirm how retained fibre is removed before cleaning and how screen integrity is checked after reassembly.
Selection data to specify
| Decision | Information needed |
|---|---|
| Separation criterion | Particle size or retained-solids test, with sampling method |
| Hydraulic basis | Actual milk temperature, viscosity, flow and permitted pressure loss |
| Changeover | Cleaning frequency, spare screen arrangement and disposal route |
Application limits
A visually smooth filtrate can still cream or separate. This duty does not replace homogenization, formulation assessment or thermal validation.
Trial and acceptance evidence
Measure filtrate and retained material across the run. Track pressure loss and product loss as the screen loads; confirm downstream equipment particle limits.
From scope to specification
Define the coarse-fibre separation duty
Send the material you receive, the product you want and the packaging boundary. Add measurements where available.